Wolf DCX-1500I Home Theater System User Manual


 
Wolf Cinema Owner's Manual
B-9
HELP TEXT:TohavetheHelpTextforaspeciccommandreturnedasareplyfromtheprojector,
add the letter “H” to your request message. For example:
(CON?H) What is the help text for the Contrast Control?
(CON! “The Contrast is crushed”) Reply from the projector.
GLOBAL INQUIRY: Add the letter “G” in your requestmessagetondoutifthecontrolisglobal.
A reply of “001” is returned if the control is global. For example:
(BDR?G) Is BDR a global control?
(BDR!001) BDR is a global control.
INDEX VALUE: When a control uses indexes for multiple values, insert an “I” into your request
messagetonoutthespecicvalueoftheindexparameter.Forexample:
(BRU? I22) WhatisthevalueforWhiteFieldUniformityspeciedbyindex22?
(BRU! 123) The value is 123 for index 22.
ACCESSING A LIST: For a control with a list of available options, add the letter “L” to your
request message to get a reply of the available options in that list control in the order they appear
in the menu. The reply message includes the following four parameters:
P1=1, item selectable
P2=1, item displayable
P3=value of item
P4=text for item
Examples:
(STD?L) What are the list options for the STD list control?
(STD!L001 001 00008 “Auto”)
(STD!L001 001 00007 “NTSC”)
(STD!L001 001 00003 “NTSC4.43”)
(STD!L001 001 00000 “PAL”)
(STD!L001 001 00004 “PAL-M”)
(STD!L001 001 00005 “PAL-C”)
(STD!L001 001 00006 “PAL-60”)
(STD!L001 001 00002 “SECAM”)
(STD!L001 001 00009 “?”)
(STD!L111 “—END—”)
TheendofthelistismarkedwithP1=111.Youcanalsoaccessthetextforaspeciciteminthat
list by adding the value of that item after the L. For example:
(STD?L4) What is the text for item for in the Video Standard list?
(STD!L001 001 00004 “PAL-M”)
CONTROL NAME:Tondoutthenameofthecontrolyouareusing,addtheletter“N” to your
request message. If the control uses indexes for multiple values, insert the index number after
the “N” to read the name of the index. For example:
(CON?N) What is the name of the CON control?
(CON! “Contrast”)
(BRU?N2) What is the name for index parameter 2 for BRU?
(BRU! “Left Side, R”)
(BRU?N6) What is the name for index parameter 6 for BRU?
(BRU! “Top Left Corner, R”)
CONTROL TYPE:Tondoutthetypeofcontrolitisthatyouareusing,addtheletter“T” to
your request message. If indexes are being used for control with multiple values, insert the
index parameter after the “T”tondoutthetypeofcontrolthattheindexis.Forsomeslide
bar or number controls, an additional parameter may be returned to specify the number of
decimal places the control uses and if the control is to be displayed as a percentage (0=min and
100=max). If the reply message does not contain the letter “T”, than this function is invalid for
that control. The parameters for control types are:
AppendixB►SerialCommunications