4
36
Authorizing Your Receiver
• Press the EXIT key on the remote control. Then press the number keys for the
authorization channel.
• Press the OPTIONS key on the remote control. The Options menu will appear.
• From the Options menu, select option 6 (Change System Settings), and the
System Settings menu will appear.
• Select option 4 (Check System Status), and the System Status menu will
appear. Line A shows your Unit ID number.
• Telephone the company that provides your programming subscription, and ask
to authorize your unit.
• When your receiver has received the authorization message, the Trip Counter
on the Installation Settings menu will advance.
Completing the Receiver Connections to
Your Entertainment System
YouwillneedtomakechangestoconnectyourVCR.
• Connect the top/left TV terminal on the back panel of the receiver to the IN
terminal on the VCR. If you had already connected this cable to your TV you
must disconnect and connect it to your VCR.
• Connect the OUT terminal(s) on the VCR to the VHF IN terminal(s) on the
TV.