Filter
Top Products
169
Recording
Playback
Others
Introduction
Editing
Function setup
Library
Recording
Cannot be recorded on a DVD-RAM disc.
• The disc is protected from deleting data.
→Set the write-protect tab to the opposite of
“PROTECT” (
page 8).
• The disc is protected by a PC or the recorder.
→Disable the protection on the device which
protected the disc.
• The disc space is not sufficient.
→Delete unwanted data (
page 52) or prepare a
new disc.
• The disc is not initialized.
→Initialize the disc (
page 34).
• The disc may contain errors.
→Complete the physical format on the disc
(
page 35).
• The physical format on the disc is not completed.
→Complete the physical format on the disc
(
page 35).
Cannot be recorded on the HDD.
• The DVD mode is selected.
→Press HDD button.
• The disc space of the HDD is not sufficient.
→Delete unwanted data (
page 52) or move the
contents to DVD-RAM discs (
page 106).
• Some causes such as power failure may set the
recorder to reject the operation to protect the HDD.
→Copy necessary contents recorded in the HDD to
a DVD-RAM disc, and initialize the HDD.
TV Guide On Screen
TV program list does not appear when TV Guide
is pressed.
→Leave the recorder turned off overnight.
→Check the connection and setup TV Guide On
Screen™ again.
→Listings are not provided for satellite services.
• If you are using a cable box:
→Ensure the G-LINK cable is connected and its IR
transmitter (the G-LINK wand) is placed correctly
in front of the cable box. See
page 25,
“INSTALLATION GUIDE”.
→Leave the cable box turned on all of the time and
turn off the recorder when not in use or overnight.
→Consult your service provider for more
information.