Filter
Top Products
14
Index to Parts and Controls (Continued)
Introduction
Rear panel
1
43
2 6 75
8 9
INPUT1/INPUT3 jacks page 44
Use this to connect the recorder to output jacks of
external devices such as another player or
camcorder.
VHF/UHF RF IN (FROM ANT.) input socket
page 20 in “INSTALLATION GUIDE”
Connects to an antenna or cable signal.
VHF/UHF RF OUT (TO TV) output socket
page 20 in “INSTALLATION GUIDE”
Connects the supplied coaxial cable to a TV.
G-LINK jack
page 25 in “INSTALLATION
GUIDE”
Connect the supplied G-LINK cable to this jack if
you are connecting this recorder to a cable set top
box. While the recorder is turned off, the TV Guide
On Screen system changes channels on your
cable box via the G-LINK cable to download free
program listings for your area. You are also able to
control your cable set top box using the recorder’s
remote control after you connect the G-LINK cable
and go through the TV Guide On Screen setup.
Power cord
page 21 in “INSTALLATION
GUIDE”
Ventilation fan
DIGITAL AUDIO OUT BITSTREAM/PCM
OPTICAL jack
page 27 in “INSTALLATION
GUIDE”
Use this to connect the recorder to an audio
receiver equipped with an optical digital audio
input jack.
COMPONENT OUTPUT jacks
page 26 in
“INSTALLATION GUIDE”
Outputs video signals to a connected TV or
monitor.
Connects to a TV or monitor equipped with
component video jacks.