Filter
Top Products
162
Aspect ratio(Video mode)
DVD-RW
DVD-R
To set the aspect ratio when recording onto a DVD-R/RW
disc.
4:3:
Fixes the aspect ratio at 4:3.
16:9:
Fixes the aspect ratio at 16:9.
Note
• When the bit rate on “User record quality” is set to
“1.0(Mbps)” and “1.4(Mbps)”, pictures are recorded in 4:3
aspect ratio even if “16:9” is selected.
DVD compatible mode
DVD-RDVD-RW
HDD
DVD-RAM
To set whether or not recording is to be performed in the
format for which recording is allowed by the DVD-Video
standard (video, audio and other data) during recording.
This selection is important for contents when recorded on
this recorder, if they will be copied to DVD-R/RW.
Off:
For recording of contents which will not be copied to a
DVD-R/RW disc.
Both the main and SAP sounds are recorded.
When recording directly on a DVD-R/RW disc, this is
ineffective. The recorder will automatically regard this
as “Main,” and record sound of the main channel only
in stereo. Select “Main” or “SAP” for DVD-R/RW
recording.
Main:
Records sound of the main channel only in stereo.
SAP:
Records sound of the SAP channel only in stereo.
Notes
• When you select the manual rate of the picture quality
between 3.0 and 3.8 and set this mode to “Main” or “SAP”,
the picture quality may become lower than when you set
this mode to “Off”.
• You can change the setting from Quick Menu.
• It is no use to make this selection when dubbing. Select
when recording.
DVD-Video:CHP create
DVD-RW
DVD-R
To set whether chapters are to be automatically created
at a selected interval during DVD-R/RW recording.
Off:
Chapters are not set.
5 min. : 10 min. : 15 min. : 20 min.
To set the interval at which chapters are automatically
created to 5, 10, 15 or 20 minutes.
Note
• The number of chapters has the upper limit, which varies
depending on the disc condition. If the number reaches it,
no more chapters are created.
Rec DNR
DVD-RDVD-RW
HDD
DVD-RAM
Selects the level of 3D digital noise reduction that can
reduce picture noise depending on the scene.
Off:
Deactivates the 3D digital noise reduction.
On:
Sets the normal level.
Expanded:
Increases digital noise reduction.
Notes
• When you set “Rec DNR” to “On” or “Expanded” and set
“3D Y/C Separation” to “On”, the priority changes
depending on the input selection if you select the S-video
input. “Rec DNR” has priority, when you select the built-in
tuner or composite input, “3D Y/C Separation” has priority.
• If you want to avoid an afterimage, set this setting to “Off”.
3D Y/C separation
DVD-RDVD-RW
HDD
DVD-RAM
The 3D digital comb filter executes Y/C (Brightness/
Color) separation to reduce the color irregularity or cross
color interference.
Off:
Deactivates this function.
In an area where the broadcast reception is poor,
select this mode.
On:
Activates this function.
In normal conditions, select this.
Note
• Refer to the “Notes” in the above “Rec DNR”.
Customizing the function settings (Continued)
Function Setup