Filter
Top Products
50
Setting a recording (Continued)
Recording
Set recording by specifying details manually
1) Press TV Guide.
TV Guide On Screen LISTINGS appears.
2) Press
/ to select “SCHEDULE”.
3) Press Menu.
“Schedule Options” appears.
4) Press
/ to select “new manual recording” then press ENTER.
“Record Options” appears.
5) Press
/ to select “date” then press the number buttons to input the date (month, day, year).
To shift the highlight, press
/ .
6) Press
/ to select “start” then press the number buttons or / to input the start time (hour, minute,
am/pm).
To shift the highlight, press
/ .
Also set “end” in the same manner.
7) Press
/ to select “channel” then press the number buttons to input a channel number.
8) Press
/ to select “input” then press / to select the input.
Tuner: TV broadcast
Line 1, 2, 3: external device connected to the recorder
9) Press
/ to select “recorder” then press / to select the recording drive (HDD, DVD).
10
)Press ENTER.
“Record Options” is closed.
The icon appears on the TV program.
Notes
• The disc tray does not close automatically, even when the recording start time arrives. Set the recorder loaded an available
DVD-RAM/R/RW disc beforehand.
• It it not possible to record the same contents onto both the HDD and a DVD-RAM/R/RW disc simultaneously.
• When there is little time before a programmed recording starts, you may not be able to start another recording.
• Playback of the DVD drive pauses when a programmed recording onto the HDD starts.
• Do not change TV Guide On Screen settings (e.g., cable input, brand, etc.) while a recording is programmed. After then,
make the programing again if necessary.
• Confirm the “DVD compatible mode” ( page 162) setting. “Main” or “SAP” records main sound or sub-sound of multiplex
broadcasts respectively, and does not record the other. Therefore, select “Main” or “SAP” only when you record onto a DVD-
R/RW disc.
• When recording onto a DVD-R/RW disc, set “DVD compatible mode” ( page 162) to the desired recording sound for each
timer program.
• When recordings conflict, “RECORDINGS CONFLICT!” appears. Read the message, and choose an option by pressing /
then press ENTER button.