Filter
Top Products
40
Recording a TV program
To record a TV program currently being broadcast, follow the procedures of this chapter.
Recording
1
Press HDD or DVD to select a media to record
on.
HDD : To record on the HDD.
DVD : To record on a DVD-RAM/R/RW disc.
2
Select a channel to record.
Use any of the followings:
• CH/Page buttons (
/ )
• Number buttons
• TV Guide On Screen (
page 23)
3
Perform either of A or B to select the
recording mode.
(If you want to use the default setting of the recording mode,
skip to step 4.)
A
Press REC MODE repeatedly to select the
recording mode “SP”/ “LP”/“MN” on the front
panel display.
After selecting, go to step 4.
Preparation
• When you record on a DVD-RAM/R/RW disc, load it into the recorder.
- Load a disc which has sufficient space available to record the program.
- Make sure the loaded disc is not write-protected.
• If you record on a DVD-R/RW disc, set “DVD compatible mode” (
page 162) to “Main” or “SAP.” In DVD-R/RW
recording, “Off” setting is regarded as “Main.”
• If you record on a DVD-R/RW disc, set “Aspect Ratio(Video mode)” (
page 162) according to recording sources.
DVD
HDD
HDD
DVD-RAM
DVD-R
DVD-RW
123
456
789
0
CH/Page
REC MODE
Start