Filter
Top Products
DISC FUNCTION SETUP
E20
VIDEO SETUP DIGITAL SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
DOWN MIX
AUDIO OUT
DOLBY DIGITALSETUP
Use CURSOR buttons to move/scroll and adjust the
brightness in 12 levels.
Use CURSOR buttons to move/scroll and adjust the
contrast in 12 levels.
Use CURSOR buttons to move/scroll and adjust the
HUE in (+6 to -6) 12 levels.
Use CURSOR buttons to move/scroll and adjust the
saturation in 12 levels.
LT/RT
Choosing this setting when the original movie was
recorded in ProLogic Dolby Digital format will
pronounce a movie theater sound effect.
STEREO (default)
SPDIF/RAW (default)
Choose this setting, if your DVD player isconnected to a
power amplifer with a coaxial cable or an optical cable.
When playing a disc recorded with Dolby Digital, DTS
and MPEG audio formats, the corresponding digital
signals will be output from the Coaxial Output jack. This
player’s digital output jacks are designed for a
connection to a Dolby Digital, DTS or MPEG receiver or
decoder.
SPDIF/PCM
Choose this setting, if your DVD player isconnected to a
2-channel digital stereo amplifier. When playing a disc
recorded with Dolby Digital and MPEG audio formats,
the audio signal will be modulated intoa 2-channel PCM
signal and it will be output from the Coaxial Output jack
or Optical Output jack.
When LINE OUT is selected, choose this setting to
adjust the line out ratio and get different effects. If
adjusting to FULL, the audio signal peak volume will be
minimum, while adjusting to OFF, value will be
maximized.
(Sony-Philips Digital Interface Format
/Pulse code modulation)
VIDEO SETUPVIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
EXIT SETUP
DIGITAL SETUP
DOWNMIX
AUDIO OUT
DYNAMIC RANGE
EXIT SETUP
DIGITAL SETUP
DOWNMIX
AUDIO OUT
DYNAMIC RANGER
EXIT SETUP
FULL
6/8
4/8
2/8
OFF
ENGLISH