Filter
Top Products
TV FUNCTION
E18
Prior to power your Singing Machine on, connect your TV aerial Antenna Jack (75 ohm) located on the back of
the unit.
Press the POWER button, the power LED indicator will illuminate. After a few seconds the screen will display a
picture along with the audio. The Singing Machine requires tuning to select an availableTV station in your area.
PRE-SETTING THE TV STATIONS ONTO
THE SINGING MACHINE MEMORY
BASIC OPERATION OF TV
MEMORIZE CHANNELS
TV channels can be searched automatically.
1. During MENU > PRESET menu, press the
MENU CURSOR buttons to select the
MEMORIZE CHANNELS.
2.
3.
4. When ending the auto search, press the MENU
CURSOR down button.
5. To exit the menu press the MENU button.
Channel can be selected by pressing the CH /
buttons on the system or CHANNEL /
buttons on the remote control.
Specific channel selection can be achieved by
pressing the Number buttons (0-9, -/--) on the remote
control.
- -/-- button will only work in TV function mode.
CHANNEL SELECT
Note:
Note: - Preset tuning can only be completed in TV
function.
- If the Singing Machine is not in the TV function
mode, press the Function selector button on
the front of the system or press TV/AV1/AV2
or TV/DVD on the remote control to switch to
TV mode.
There
are up to 181 channels that can be set.
Press the MENU CURSOR, select the right
direction button to start the automatic scanning
process. The scanning will begin from VHF
through to UHF. The TV stations will
automatically store onto the memory of the
system.
When scanning is completed, the system will
tune itself to the lowest channel.
AIR CHANNELSAIR CHANNELS
MEMORIZE ALL
PRESET
LANGUAGE
CHANNEL
SKIP
RECEPTION
MEMORIZE CHANNELS
ENGLISH
2
ON
AIR
SELECT ADJUST EXIT
MENU
ENGLISH