Filter
Top Products
E14
CONNECTIONS
CONNECTING TO A VIDEO SYSTEM
CONNECTINGAVIDEO COMPONENT FORINPUT
There are 2 individual group input jacks (AV1 and AV2) to connect another video component for input. Please
follow the steps below to share the display on the Singing Machine’s monitor from the video source:
(4) Press the to switch to AV2 for front panel input connection or switch to AV1
for the back of the Singing Machine input connection.
Note: In order to input the audio source, the video connection be connected. If the video connection is
not completed, there will be no audio output.
FORAV1
FORAV2
D must
(1) Locate the multicolored RCApatch cords.
(2)
(3)
Connect the yellow videocable tothe Video Input Jack,red audio cable to theAudio Right channel Inputjack
and white audio cable to the Audio Left channel Input Jack respectively located on the front of your system
when the jack door is opened (Please refer to page E9 Control Location # 17). The other option is to connect
the respective cables to the back of your Singing Machine as illustrated below.
Connect the other end of the cords to the Video Output Jack, AUX Right/Left channel Output jacks on your
video system, as illustrated below.
Function Selector (TV/AV/DVD)
REAR VIEW OF
VIDEO SYSTEM
OUT
IN
LR
VIDEO
AV 1
AUDIO
LR
VIDEO
AUDIO
AUX OUT
L
R
VIDEO
OUT