Filter
Top Products
TASCAM CD-A550/CD-A750 39
The CD dubbing function is convenient when record-
ing a CD. See “Dubbing a CD to a tape” on page 39 for
details.
Recording
After completing the above preparations, set the recording
level and begin recording.
1 Press the RECORD key on the main unit or the
remote control.
This makes the unit ready to record ready. The meters
on the display show the input level and the REC indicator
appears.
The sound of the recording source is output through the
TAPE COMMON OUTPUT
jack. This sound can also be
output from the
PHONES
jack by setting the
MONITOR
switch to
MIX
or
TAPE
.
MONITOR switch
2 To set the record level, start playback of the record-
ing source and adjust the INPUT knob on the main
unit to set the optimal level while looking at the
meters. Adjust the input so that the meters indicate
0 dB at its highest level.
INPUT knob
3 Select and confirm the tape operation direction.
The current tape operation direction is shown on the
display with the reverse (Ó) or forward indicator (Á).
To record in the opposite direction, press the
TAPE
PLAY
key of the desired direction to change the tape
operation direction.
4 Press the TAPE PLAY or PAUSE key on the main unit
or the remote control to start recording.
Stopping recording
ª
Press the TAPE STOP key.
Pausing recording
ª
Press the PAUSE key. Press the PAUSE key again or
the TAPE PLAY key to restart recording.
Recording mute function
During recording, press the REC MUTE key on the
main unit or the remote control to record about four
seconds of silence and then pause recording. Press
the TAPE PLAY or PAUSE key on the main unit or the
remote control to restart recording.
Press and hold the REC MUTE key on the main unit
or the remote control for more than four seconds to
create a silence of longer than four seconds. The unit
pauses when the key is released after being held for
more than four seconds.
To create a silence of less than four seconds, press
the PAUSE key during the recording of the silence.
This pauses the unit.
If you press the REC MUTE key again during the
•
recording of silence, ordinary recording restarts.
If you press the REC MUTE key when recording is
•
paused, the unit will record four seconds of silence
and then pause again.
Dubbing a CD to a tape
The CD dubbing function allows you to press the
CD DUB
key on the main unit or the remote control to dub the CD
loaded in the unit to a cassette tape with one touch.
The input source does not need to be selected.
•
The record level is automatically set to the default
•
setting, but you can also set it manually. (See
“Adjusting the record level when dubbing” on page
40.)
The CD programmed playback, random playback,
•
single playback, repeat playback and other functions
can be used as desired when dubbing a CD.
The auto ready and incremental play functions can-
•
not be used during CD dubbing.
The following explanations assume that the CD to be
dubbed and a recordable cassette tape have been loaded in
the unit.
Basic dubbing (recording to the A side of a
tape from its beginning)
When playback is stopped, press the CD DUB key on
the main unit or the remote control.
7 – Recording Cassette Tapes