Filter
Top Products
TASCAM CD-A550/CD-A750 23
5 – Playing Back CDs
OPEN/CLOSE key
Instead of pressing the OPEN/CLOSE key to close the disc
tray, you can press the CD PLAY or READY key on the
main unit or the remote control to close the disc tray
and begin playback immediately.
CAUTION
If you open the disc tray while this unit is in use, the fol-
lowing settings are lost.
• Program
• CALL point
• Resume point
• Current folder (for data CDs)
Tray lock function
Turn the tray lock function ON to disable the
OPEN/CLOSE
keys during playback and when playback is paused so that
the disc tray is not opened unintentionally. This allows you
to prevent accidentally interrupting playback by pressing
the
OPEN/CLOSE
key. The default setting for the unit is
OFF. To turn the tray lock function ON, use the menu and
conduct the following procedures.
1 When in standard display mode, press the MENU
key on the main unit or the remote control to enter
menu mode.
2 Use the –/+ keys on the main unit or the remote con-
trol to show “
TRAY LOCK?
” on the main display,
and press the ENTER key.
3 Use the –/+ key to change the setting from
OFF
(default value) to
ON
.
4 Press the ENTER key to return to the standard dis-
play.
CD playback
The following explanation assumes that the necessary
connections have been made, the unit’s power is ON and a
CD (audio CD or data CD) has been loaded.
To start CD playback, press the
CD PLAY
key on the main
unit or the remote control.
A CD and a cassette tape can be played at the same
time.
CD-PLAY key
CD PLAY key
• Stopping playback
Press the CD STOP key on the main unit or the
remote control.
• Pausing Playback
Press the READY key on the main unit or the remote
control.
In this Owner’s Manual, explanations assume that the CD
playback mode is set to CONTINUE (continuous playback
mode) unless otherwise specified.