Filter
Top Products
26 TASCAM CD-A550/CD-A750
5 – Playing Back CDs
–/+ key
ENTER key
ENTER key
–/+ key
3 Use the –/+ keys on the main unit or the remote con-
trol to select “ON.”
4 Press the ENTER key on the main unit or the remote
control to return to the standard display.
If the FOLDER PLAY item is set to “OFF,” the playback
area is set as the entire data CD.
Selecting the current folder
When using the controls on the main unit, with play-
back stopped, press the FOLDER SEARCH –/+ keys
while pressing and holding the SHIFT key to switch
folders. When using the remote control, with playback
stopped, press the FOLDER Ó/Á keys to switch folders.
During this operation, folder titles (album titles) appear on
the display.
If the folder was changed while playback was stopped, the
unit returns to the standard display and playback is stopped
at the beginning of the new folder.
If the folder was changed during playback or while paused,
after changing to the desired folder using the procedures
above, the folder is confirmed after one second elapses, and
the folder name is shown on the display for two seconds.
You cannot skip through folders during playback or
when paused if the current playback mode is program
mode.
CAUTION
The following settings are lost when the current folder
is changed.
Program
•
CALL point
•
Playback modes
This unit can play tracks using the following four methods
(playback modes).
Continuous playback (default setting)
The tracks on a disc are played back in numerical order.
In folder playback mode, the tracks in the current play-
back folder on a data CD are played back in numerical
order. See “Folder playback (data CDs only)” on page 25.
Single playback
The currently selected track is played once and then
playback stops.
Random playback
The tracks on the disc are played back randomly regardless
of track number. After all tracks have been played once,
playback stops.
In folder playback mode, the tracks in the current play-
back folder on a data CD are played back in random
order. (See “Folder playback (data CDs only)” on page
25.)
Programmed playback
Tracks are played back in the programmed order. See
“Programmed playback” on page 27 for details.
Selecting the playback mode
Use the dedicated
P.MODE
key on the remote control to
select playback mode easily. You can also use the menu to
set it from the main unit.