Filter
Top Products
44
Setting the clock manually
Explanation:
You can set the time of day manually provided that the
setting method (TIME) is set to MAN (manual) (see
section 'Clock - selecting the method of setting the
time').
Operation:
Select TUNER as the listening source:
Press the remote control button
briefly.
To set the clock press the remote control buttons briefly
in the sequence stated above. The screen shows the
current time of day, e. g.:
'
10
1010
10 -
- -
- 25 CLK
25 CLK 25 CLK
25 CLK
'
.
You can change the time using the
or
buttons.
The time changes slowly initially, but the rate of change
increases if you hold the button pressed in.
You must press the
button to accept the set
time.
The screen displays the updated time of day in the top
left corner, e. g.:
Note:
Once you have set the clock, you can either leave the
menu by pressing the
button, or move to a
different menu point using the
/
buttons.
Setting the alarm time
Explanation:
In this menu point you can set the alarm time.
Operation:
Select TUNER as the listening source:
Press the remote control button
briefly.
The first step is to adjust the M-system to the exact
settings you wish to use when the alarm switches it on,
i. e. volume, loudspeakers and station.
Now press the remote control buttons briefly in the
sequence stated above. The screen displays the current
alarm time, e. g.:
'
09-00 TIM
09-00 TIM09-00 TIM
09-00 TIM
'
.
This time can be changed using the
or
buttons.
The time changes slowly initially, but the rate of change
increases if you hold the button pressed in.
You must press the
button to accept the set
time. The alarm activates automatically (the red LED
lights), the display shows '
09-00
09-0009-00
09-00 SET
SET SET
SET
'.
Note:
Once you have set the clock, you can either leave the
menu by pressing the
button, or move to a
different menu point using the
/
buttons.