Filter
Top Products
User's Manual
34
CHAPTER 4
INPUTS P2
TUNER
TUNER PRESETS
TAPE
PHONO
8-CHANNEL
8-CH INPUT CONFIGURE
NAME 8-CHANNEL
GAIN TRIM 0.5
LCK TO VID VID1
MAIN ZONE ENABLE
TRIG RELAY ON
MAIN MENU
TRIMS
MODES
TONE
INPUTS
SETTINGS
Input Menus
These menus let you select which
input you would like to confi gure.
Pressing the joystick right on each
input brings up a second menu which
allows you to confi gure what happens
when each input is selected.
Input Menus
INPUTS
DVD
CD
SAT
VID1
VID2
VCR
Input Confi guration Menus
Name
Use the joystick up/down, and left/
right to change the display name
for any input, up to 9 characters.
Move fully left when fi nished.
Gain Trim
Use this to adjust all of your
sources to play at similar levels. To
prevent overloading, the levels can
only be adjusted downwards.
Default Mode
Set the input to a favorite surround
mode, or the last mode, or stereo.
Video Type
If you know the type of video used
for each input, select the type from
CVID (composite), SVID (S-video)
or COMP (component). Otherwise,
choose AUTO, and the TGP-5 will
automatically detect the source
type when a video signal is pres-
ent. There maybe some delay in
Auto, for certain program material.
Main Zone
Enable/disable the selected input
in the Main Zone. You can disable
any unused inputs, then it will not
play in the Main Zone.
Trigger Relay
The Trigger Relay can be set to
turn on whenever the input is se-
lected. This could be used to turn
on an amplifi er or a video screen
for example.
Zone 2
Enable/disable the input in Zone 2.
You can select the inputs you wish
to play in Zone 2. For example,
you might disable the Phono input
if nobody in Zone 2 appreciates
your vintage collection of Swing
78s.
Full Auto
Select on, and the TGP-5 will turn
on and select this input whenever
this input starts to play. Use off
for any input which hinders auto
operation.
Note: the 8-Channel input menu is
slightly different from the other
menus:
It allows you to select a specifi c
video input whenever the 8-Chan-
nel audio input is selected. Also,
this input only works in the Main
Zone, not Zone 2.
DVD INPUT CONFIGURE
NAME DVD
GAIN TRIM 0.5
DEFLT MODE LAST
VIDEO TYPE AUTO
MAIN ZONE ENABLE
TRIG RELAY ON
ZONE 2 ENABLE
FULL AUTO OFF