Filter
Top Products
Video/Audio Adjust menu07
40
En
Audio Adjust
From the Audio Adjust menu you can set the Audio DRC (Dynamic
Range control).
Audio DRC
• Default setting: Off
When watching Dolby Digital BD and DVD discs, as well as PC files
with Dolby Digital audio, at low volume, it’s easy to lose the quieter
sounds completely—including some of the dialog. Switching Audio
DRC (Dynamic Range Control) to On can help by bringing up the
quieter sounds, while controlling loud peaks.
How much of a difference you hear depends on the material you’re
listening to. If the material doesn’t have wide variations in volume,
you may not notice much change.
Important
• Audio DRC is effective with the following types of audio:
– Analog audio from the AUDIO OUT (2ch) and AUDIO OUT
(5.1ch) jacks.
– PCM audio from the DIGITAL AUDIO OUT and HDMI OUT
jacks (see also About the audio output settings on page 44).
1 Press HOME MENU and select ‘Video/Audio Adjust’ from
the on-screen display.
2 Select ‘Audio Adjust’.
3 Highlight Audio DRC, then use the
/ buttons to change to ‘Off’, ‘Level 1’, ‘Level 2’ or ‘Max’ as
required.
4 Press ENTER or RETURN to make the setting and exit the
Audio Adjust screen.
Home Menu
Disc Navigator
Home Media Gallery
Video/Audio Adjust
Initial Setup
Video/Audio Adjust
Video Adjust
Audio Adjust
Audio Adjust
Audio DRC
Off
Max