Filter
Top Products
5-2
DFP-3000
SELECT
12345678
SDDS
NR2
SELECT
12345678
NR2
TRIM: 0 dB
MENU
SELECT
12345678
NR2
TRIM: 0 dB
MENU
SELECT
12345678
STATUS CONFIG TEST
SELECT
12345678
PASSWORD: S * * *
MASTER VOLUME
SELECT
12345678
PASSWORD: * * * *
MASTER VOLUME
5.3.1 Select any Preset other than non-sync by pressing
its PRESET button twice. If you have selected
Preset 8 for SDDS the LCD display will appear as
illustrated.
5.3.2 Press the button.
5.3.3 The NR2 TRIM value will now be flashing. Press
the button so that the MENU option is
flashing.
5.3.4 With the MENU option flashing, press the SE-
LECT button.
5.3.5 The STATUS option will now be flashing. Press
the button again. This will cause the CON-
FIG option to flash.
5.3.6 With the CONFIG option flashing, press the
SELECT button.
5.3.7 Turn the MASTER VOLUME control clockwise
until the first character in the password field is
changed to “S”. The default A-Chain password is
“SONY”.
5.3.8 When the first character becomes “S”, press the
SELECT button to enter it and move to the next
character. Continue using the MASTER VOL-
UME control and SELECT button to enter all
characters of SONY.