Filter
Top Products
25
GB
C:\Documents and
Settings\pc13\Desktop\JC060000_2886257121SDE700_GB\2886257121\GB05OTH_ST-
SDE700-CEL.fm
masterpage: Right
ST-SDE700
2-886-257-12 (1)
Other Operations
Changing the display
You can check the status of this tuner and the
information about the programme using the
display.
Be sure to use the buttons on the tuner for this
operation.
Press DISPLAY.
Each time you press the button, the display
changes cyclically as follows.
FM and AM band
Program Service name
a)
or index name of the
preset station
b)
t Frequency t Program
Type indication
a)
t Radio Text indication
a)
t Current Time indication
(in 24-hour
system)
a)
a)
During RDS reception only (page 23).
b)
Index name appears only when you have assigned
one to the preset station (page 23). Index name
does not appear when only blank spaces have been
entered.
DAB band
Service Component Label t Frequency t
Program Type indication
t Dynamic label
segment t Current Time indication
(in 24-
hour system)
a)
t Channel label t Audio
info
b)
t Signal Quality
c)
a)
Time information appearing in the display is sent
by the DAB station. As a result, the time may not
be displayed properly if the station is located in a
different time zone.
“_ _H _ _M” will display until time information is
received.
b)
Audio information on bit rate (32kbps - 256kbps),
signal type (stereo, dual, mono) and sampling type
(F: 48kHz, H: 24kHz) is displayed.
Example: 128K S F
c)
The DAB station signal quality is displayed.
“Q. _ _ _” is displayed until the signal quality
information is received.
Note
When “STEREO” appears in the display, the current
program is broadcasted in the stereo/joint (intensity)
stereo mode.
Other Operations
GB01COV_ST-SDE700-CEL.book Page 25 Tuesday, July 25, 2006 4:52 PM