Filter
Top Products
11
GB
C:\Documents and
Settings\pc13\Desktop\JC060000_2886257121SDE700_GB\2886257121\GB03CON_ST-
SDE700-CEL.fm
masterpage: Right
ST-SDE700
2-886-257-12 (1)
Getting Started
The following illustration shows how to
connect a component which has digital optical
jacks such as DAT deck or MD recorder, etc.
With this connection, you can do digital-to-
digital recording and obtain the highest
possible sound quality when recording DAB
digital broadcasts.
Notes
• The DIGITAL DAB OPTICAL OUT jack has a
retractable cover. Insert the plug into the jack.
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
• FM/AM broadcast signals are not output from the
DIGITAL DAB OPTICAL OUT jack.
• When you use a recorder which does not support
the 48kHz sampling frequency mode, you cannot
play or record the digital signals from the
DIGITAL DAB OPTICAL OUT jack.
Connecting components with
digital optical jacks
AM
OUT
ANTENNA
ANALOG
L
R
DAB
OPTICAL OUT
DIGITAL
DAT deck/
MD recorder
A
A Optical digital cord (not supplied)
GB01COV_ST-SDE700-CEL.book Page 11 Tuesday, July 25, 2006 4:52 PM