Filter
Top Products
20
GB
C:\Documents and
Settings\pc13\Desktop\JC060000_2886257121SDE700_GB\2886257121\GB04REC_ST-
SDE700-CEL.fm
masterpage: Left
ST-SDE700
2-886-257-12 (1)
Storing FM stations
automatically
(AUTOBETICAL)
This function lets you store up to 30 FM and
FM RDS stations in alphabetical order without
redundancy. Additionally, it only stores the
stations with the clearest signals.
If you want to store FM or AM stations one by
one, see “Presetting radio stations” (page 21).
Be sure to use the buttons on the tuner for this
operation.
1 Press POWER to turn on the
tuner.
2 Press BAND repeatedly to
select the FM band.
3 Press AUTO-BETICAL SELECT.
“A. BETICAL” flashes on the display.
4 Press ENTER.
“AUTO-BETICAL SELECT” scrolls
across the display and the tuner scans and
stores all the FM and FM RDS stations in
the broadcast area.
For RDS stations, the tuner first checks
for stations broadcasting the same
program, then stores only the ones with
the clearest signal. The selected RDS
stations are sorted alphabetically by their
Program Service name, then assigned a 2-
character preset code. For more details on
RDS, see page 23.
Regular FM stations are assigned 2-
character preset codes and stored after the
RDS stations.
Notes
• Buttons on the tuner or supplied remote will not
function during autobetical operation, except
POWER.
• If you move to another area, repeat this procedure
to store stations in your new area.
• For details on tuning the stored stations, see
“Tuning to preset stations” (page 22).
• If you move the antenna after storing stations with
this procedure, the stored settings may no longer be
valid. If this happens, repeat this procedure to store
the stations again.
1234567890
DIMMER DISPLAY
NAME IN FM MODE
TUNING MODE
MEMORY
RETURN
ENTERBAND
DIRECT
PRESET
DAB
INIT SCAN
AUTO-BETICAL
SELECT
POWER
TUNING/SELECT
1
342
GB01COV_ST-SDE700-CEL.book Page 20 Tuesday, July 25, 2006 4:52 PM