Sony STR-DH710 Stereo Receiver User Manual


 
94
GB
When the receiver is in standby mode,
there is no image or sound on the TV.
When the receiver is in standby mode,
image and sound are output from the
HDMI component selected the last time
you turned off the receiver. If you are
enjoying other component, play the
component and perform the One-Touch
Play operation, or turn on the receiver to
select the HDMI component you want to
enjoy.
• Make sure “PASS.THRU” is set to “ON”
in the HDMI menu if you connect
components not compatible with the
“BRAVIA” Sync to the receiver (page 82).
S-AIR connection is not established
(sound transmission is not
established), e.g., the indicator of the
S-AIR sub unit turns off, flashes, or
turns red.
If you use another S-AIR main unit, place
it more than 26 feet (8 m) away from this
S-AIR main unit.
Confirm the S-AIR IDs of the S-AIR main
unit and S-AIR sub unit (page 61).
Another S-AIR sub unit is paired to the
S-AIR main unit. Pair the desired S-AIR
sub unit with the S-AIR main unit (page
62).
Place the S-AIR main unit and S-AIR sub
unit separately from other wireless
devices.
Avoid using any other wireless devices.
• The S-AIR sub unit is turned off. Make
sure the AC power cord (mains lead) is
connected and turn on the S-AIR sub unit.
No sound is heard from the S-AIR
receiver.
Check that the components are connected
to this receiver.
No sound is heard from the S-AIR
product.
If you use another S-AIR main unit, place
it more than 26 feet (8 m) away from this
S-AIR main unit.
Confirm the S-AIR IDs of the S-AIR main
unit and S-AIR sub unit (page 61).
Confirm the pairing setting (page 62).
Place the S-AIR main unit and S-AIR sub
unit closer to each other.
Avoid use of equipment that generates
electromagnetic energy, such as a
microwave oven.
Place the S-AIR main unit and S-AIR sub
unit separately from other wireless
devices.
Avoid using any other wireless devices.
Change the “RF SETUP” setting (page
65).
Change the S-AIR ID settings of the
S-AIR main unit and S-AIR sub unit.
Turn off the system and S-AIR sub unit,
then turn on them.
Check that headphones are not connected
to the S-AIR sub unit.
There is noise or the sound skips.
If you use another S-AIR main unit, place
it more than 26 feet (8 m) away from this
S-AIR main unit.
Place the S-AIR main unit and S-AIR sub
unit closer to each other.
Avoid use of equipment that generates
electromagnetic energy, such as a
microwave oven.
Place the S-AIR main unit and S-AIR sub
unit separately from other wireless
devices.
Avoid using any other wireless devices.
Change the “RF SETUP” setting (page
65).
Change the S-AIR ID settings of the
S-AIR main unit and S-AIR sub unit.
S-AIR function