Sony STR-DH710 Stereo Receiver User Manual


 
57
GB
“BRAVIA” Sync Features
Enjoying the TV sound
from the speakers
connected to the receiver
(System Audio Control)
You can enjoy the TV sound from the speakers
connected to the receiver by a simple
operation.
You can operate System Audio Control
function using the TV menu. For details, refer
to the operating instructions of the TV.
TV Receiver
You can also use the System Audio Control
function as follows.
If you turn on the receiver while the TV is
turned on, the System Audio Control
function will automatically be set to on and
the TV sound will output from the speakers
connected to the receiver. However, if you
turn off the receiver, the sound will output
from the TV speakers.
When you adjust the TV volume, the
receiver’s volume is adjusted
simultaneously.
Notes
•If System Audio Control does not function
according to your TV setting, refer to the operating
instructions of the TV.
•When “CTRL.HDMI” is set to “CTRL ON”, the
“AUDIO.OUT” settings in the HDMI menu will
set automatically depending on the System Audio
Control settings.
• When you connect a TV that does not have System
Audio Control function, the System Audio Control
function does not work.
•If the TV is turned on before turning on the
receiver, the TV sound will not be output for a
moment.
Sets System Audio
Turns on (if in
Control to on standby mode)
Switches to
appropriate
HDMI input
Minimizes TV Outputs TV
volume sound