Filter
Top Products
61
GB
S-AIR Operations
• Other factors
The following may cause poor reception.
–Materials or structures, such as walls and
floors
–The location where an S-AIR product is
placed
When using S-AIR products, place them as far
as possible from the above electronic
equipment, or place where S-AIR reception is
stable.
Setting up an S-AIR
product
Before using an S-AIR product, be sure to
perform the following settings to establish the
sound transmission.
• Inserting the wireless transmitter/
transceiver (page 31).
• Establishing sound transmission between
the S-AIR main unit and S-AIR sub unit (ID
setting) (page 61).
• Pairing the S-AIR main unit with a specific
S-AIR sub unit (Pairing operation) (page 62).
When you match the ID of the S-AIR main
unit and the S-AIR sub unit, you can establish
sound transmission. You can use multiple
S-AIR main unit by setting a different ID for
each unit.
To set the ID of the S-AIR main
unit
1
Press AMP MENU.
2 Press V/v repeatedly to select “S-AIR”,
then press
or b.
3 Press V/v repeatedly to select “ID
SETUP”, then press or b.
4 Press V/v repeatedly to select the ID
(A, B or C) you want, then press .
To exit the menu
Press AMP MENU.
Establishing sound transmission
between the S-AIR main unit and
S-AIR sub unit (ID setting)
MENU
O
AMP
MENU
,
V/v/B/b
continued