Filter
Top Products
8
Recording a CD
— CD Synchro Recording
The CD SYNC button lets you record from a
CD to a tape easily. You can use TYPE I
(normal), TYPE II (CrO2), or TYPE IV (metal)
tape, since the tape deck automatically
detects the tape type.
2 Press § on the tape deck to open the
cassette tray and insert a blank tape.
Press § again to close the cassette tray.
3 Place a CD on the disc tray of the
CMT-SD1/SD3.
4 Set DIRECTION to A to record on
one side, Å to record on both
sides once.
5 Press REC LEVEL lightly to release,
and turn to set the recording level.
REC LEVEL position around 4 sets the
general recording level for most CDs.
To set a specific recording level for the
CD you are recording, see "Recording
Manually" on page 9.
6 Press CD SYNC on the tape deck.
The tape deck stands by for recording
and the CMT-SD1/SD3 stands by for
playback. The indicators on the CD
SYNC, rREC, · (for the top side) and
∏ buttons light up.
If you want to record starting from the
bottom side, press ª (for the bottom
side) so the indicator on the ª button
lights up.
* This tape deck is able to switch between Dolby B-
type and C-type noise reduction systems.
1 Press 1/u on the CMT-SD1/SD3 to
turn on the CMT-SD1/SD3
component system.
The tape deck turns on automatically.
The remote supplied
with the CMT-SD1/SD3
With the side you want to
record on facing up
Tape deck
TC-SD1
·
ª
•
•
•
•
•
•
•
•
•
0
10
)
0
π
p
1/u
TAPE
indicator
2
ª
6475
DOLBY NR
*