Filter
Top Products
12
7 Press § on the tape deck to open the
cassette tray and insert a blank tape.
Press § again to close the cassette tray.
8 Press 1/u on the CMT-SD1/SD3 to
turn off the system.
The tape deck is now ready for the timer
recording. The power turns on
automatically at the start time, the
recorging starts, then the power turns off
at the stop time.
Timer recording radio programmes
(continued)
With the side you want to
record on facing up
·
ª
•
•
•
•
•
•
•
•
•
0
10
)
0
4 Set the time to start recording.
Press +/– to set the hour, then press
ENTER.
The minute indication flashes.
Press +/– to set the minute, then press
ENTER.
The hour indication flashes again.
5 Set the time to stop recording
following the procedure in step 4.
If the stop time is same as the start time,
“OFF TIME NG!” appears and the
display returns to set the stop time. Set
the time to stop recording again.
6 Press +/– repeatedly until “TUNER
to TAPE” appears, then press
ENTER.
The start time appears, followed by the
stop time, preset number and “TAPE”,
then the original display appears.
“REC” in the display and the timer
indicator light up.
When “CONNECTION” appears
The system cable is not connected correctly.
Turn off the power, connect the components
correctly, and turn on the power again. Then
start over from step 1.
DAILY REC SLEEP
SHUFFLE PROGRAM REPEAT TUNED STEREO MONO1 SURR
DBFB
kHz
MHz
DISC
AUTO
PRESTMANUAL