Filter
Top Products
10
To
Stop recording
Pause recording
2 Press § on the tape deck to open the
cassette tray and insert a blank tape.
Press § again to close the cassette tray.
3 Press FUNCTION on the
CMT-SD1/SD3 until the source you
want to record (such as “TUNER”
or “AUX*”) appears in the display.
When recording from CD or MD, select
the track you wish to record and pause
playback.
When recording off the radio, tune in the
preset station.
* Select to record the audio output of the
component connected to the CMT-SD1/SD3
AUX jacks.
For details, refer to "Optional A/V
components" in the CMT-SD1/SD3 component
system Operating Instructions.
4 Set DIRECTION to A to record on
one side, Å to record on both
sides once.
5 Press rREC on the tape deck.
The tape deck stands by for recording.
The indicators on the rREC and · (for
the top side) buttons light up.
If you want to record starting from the
bottom side, press ª (for the bottom
side) so the indicator on the ª button
lights up.
Press
π (or p on the remote)
∏ (or P on the remote)
With the side you want
to record on facing up
6 Start playback on the component
you want to record.
7 Press REC LEVEL lightly to release,
and turn to set the recording level.
The level indicator reads the current
recording level.
8 Once you have set the recording
level, stop playback on the source
component.
9 Press ∏ on the tape deck.
Recording starts.
10Start playing on the source
component.
·
ª
•
•
•
•
•
•
•
•
•
0
10
)
0
a
dB
-10 -5
+3 +6
∞
0
-
Adjust as the 0 (zero) indicator lights up
Recording manually (continued)