Filter
Top Products
21
Additional Information
Power consumption
30 W
Dimensions (approx) (w/h/d)
430 × 135 × 350 mm (w/h/d)
(17 × 5
3
/
8 × 13
7
/
8 inches)
including projecting parts and controls
Mass (approx.)
6.5 kg (14 lbs 6 oz)
Supplied accessories
Audio connecting cords (2 phono plugs - 2 phono
plugs) (2)
Remote commander RM-J903 (1)*
Sony size AA (R6) batteries (2)*
* not supplied with the U.S.A. and Canadian models
Design and specifications are subject to change without
notice.
Specifications
System
Recording system
4-track 2-channel stereo
Fast-winding time (approx.)
90 sec. (with Sony C-60 cassette)
Bias
AC bias
Signal-to-noise ratio (at peak level, weighted, and with Dolby NR off)
Type I tape, Sony Type I (NORMAL): 56 dB
Type II tape, Sony Type II (HIGH): 58 dB
Type IV tape, Sony Type IV (METAL): 59 dB
S/N ratio improvement (approximate values)
With Dolby B NR on: 5 dB at 1 kHz, 10 dB at 5 kHz
With Dolby C NR on: 15 dB at 500 Hz, 20 dB at 1 kHz
With Dolby S NR on: 10 dB at 100 Hz, 24 dB at 1 kHz
Harmonic distortion
0.4 % (with Type I tape, Sony Type I (NORMAL):
160 nWb/m 315 Hz, 3rd H.D.)
1.8 % (with Type IV tape, Sony Type IV (METAL):
250 nWb/m 315 Hz, 3rd H.D.)
Frequency response (Dolby NR off)
Type I tape, Sony Type I (NORMAL): 25 - 16,000 Hz
(±3 dB, IEC)
Type II tape, Sony Type II (HIGH): 25 - 18,000 Hz
(±3 dB, IEC)
Type IV tape, Sony Type IV (METAL): 25 - 20,000 Hz
(models for the U.S.A. and Canada), 25 - 19,000 Hz
(models for other countries) (±3 dB, IEC)
30 - 15,000 Hz (±3 dB, –4 dB recording)
Wow and flutter
±0.09% W. Peak (IEC)
0.06% W. RMS (NAB)
±0.16% W. Peak (DIN)
Variable pitch range (approx.)
–30 to +30%
Inputs
Line inputs (phono jacks)
Sensitivity : 0.16 V
Input impedance : 47 kilohms
Outputs
Line outputs (phono jacks)
Rated output level : 0.5 V at a load impedance of
47 kilohms
Load impedance : Over 10 kilohms
Headphones (stereo phone jack)
Output level : 0 to 3 mW at a load impedance of
32 ohms
General
Power requirements
Where purchased Power requirements
U.S.A. and Canada 120 V AC, 60 Hz
Australia 240 V AC, 50/60 Hz
Other countries 120/220/240 V AC,
50/60 Hz