Filter
Top Products
CD/MP3/MD – Play
15
GB
Other operations
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press H.
However, the program is cleared when you open the
disc tray, eject the MD or pull out the power cord.
• “– – –:– –” appears when the total playing time of the
CD exceeds 100 minutes or when the total playing
time of the MD exceeds 1,000 minutes.
• “– – –:– –” appears when the MP3 files are
programed. The total playing time cannot be
displayed during MP3 Play.
This function allows you to listen only to your
favorite tracks which you have registered into a
group. For details of the Group Function, see
“Registering tracks in groups” on page 31.
1 Set to MD in CD MD select switch.
2 Press GROUP ON/OFF in stop mode
repeatedly until “GROUP ON” appears.
3 Press ALBUM/GROUP – or + (or
GROUP SKIP) repeatedly until the
desired group appears.
4 To start playing from a specific track in
the group, press . or >
repeatedly (or turn AMS) until the
desired track appears.
Proceed to step 5 when you start playing
from the first track in the group.
5 Press H.
Playback starts.
When the playing of the last track in the
group finishes, the MD deck stops
automatically.
To Do this
Cancel Program PlayPress PLAY MODE in stop
mode repeatedly until both
“PROGRAM” and “SHUFFLE”
disappear.
Check the program
order
Press . or > repeatedly (or
turn AMS) in pause mode.
Select the desired
tracks using the
number buttons
Press number buttons instead of
performing steps 3 – 4.
Add a track to the
end of the program
Perform steps 3 – 4 in stop mode.
Program an MP3
Press ALBUM/GROUP – or +
(or press
ALBUM, then turn
AMS) to select album, before
step 3.
Erase the program Press CLEAR in step 4. Each
time you press the button, a track
is cleared from the end of the
program.
Playing only the tracks in
the desired group
3
4
2
1
5
continued