Filter
Top Products
CD/MP3/MD – Play
13
GB
Set to CD or MD in CD MD select switch.
You can quickly locate any track by using the
AMS (Automatic Music Sensor) control on the
deck, . and > buttons on the remote, or
number buttons on the remote.
Tips
• To go quickly to the beginning of the last track, press
. (or turn AMS counter clockwise) in stop mode.
• To pause playing at the beginning of a track, press
. or
> (or turn AMS) after pausing playback.
Playing a track by entering the
track number
You can also select the desired track using the
remote during Normal Play. Press the number
button(s). Playback automatically starts.
To enter a track number over 10
1 Press >10 once if it is a 2-digit track number,
and twice if it is a 3-digit track number.
2 Enter the corresponding digits for the same
number of “–” flashing in the display.
To enter 0, press 10/0.
Examples:
• To enter 6 while “– – –” flashes in the display, press
10/0, 10/0 and 6.
• To enter 100 while “– – –” flashes in the display,
press 1, 10/0 and 10/0.
Locating a specific track
— AMS Function
To locate Do this
The next or
succeeding tracks
During playback, press > (or
turn AMS clockwise) until you
find the track.
The beginning of
the current or
preceding tracks
During playback, press . (or
turn AMS counter clockwise) until
you find the track.
A specific track
by using AMS
While the deck is stopped, press
. or
> (or turn AMS), then
press H (or AMS).
./>
H
CD/MD
.
AMS
>
(CD)
.
AMS
>
(MD)
Number buttons