Filter
Top Products
72
Using the alarm (Melody
Timer)
1 Enter the menu and select “USEFUL”
- “M-TIMER” - “ON”.
, lights up in the display and the
alarm sound can be selected.
2 Turn the jog dial repeatedly to select
the alarm sound, and then press the
jog dial.
See step 5 of “Setting the alarm
(Melody Timer)” (page 40) for the
varieties of alarm sound.
3 Turn the jog dial to select the elapsed
time.
One rotation of the control changes
the elapsed time setting (TIME :) by 1
minute, within a range of 1 to 99
minutes. To change the time quickly,
keep turning the jog dial.
4 Press the jog dial to enter the
selection.
The time remaining until the alarm is
shown in the display while the
recorder is stopped.
To cancel the alarm setting
Select “OFF”.
To stop the alarm
Press any button.
For details and the remote control
operation, see page 40.
Storing the settings for
individual discs
(Personal Disc Memory)
The recorder can store the various settings
for each disc, and then retrieve them
automatically whenever the disc is
inserted.
The following setting can be stored:
• Vo l u m e
• Play mode
• Group mode
• Program play
• Sound quality (Virtual Surround/6-Band
Eqaualizer)
• Playback speed (Digital Pitch Control)
• Bookmark
1 When the recorder is stopped,
playing, or play-paused, enter the
menu and select “USEFUL” -
“PERSONAL”.
“Entry?” appears in the display.
2 Press the jog dial (on the recorder) or
jog lever (on the remote control) to
enter the selection.
“Entry OK” appears in the display
and the disc settings are stored in the
recorder.
Display window on the recorder
Display window on the remote control