Filter
Top Products
53
Editing groups
This section explains the operations that
are done on the recorder. For details on
operations done on the recorder, see the
pages indicated for each operation.
Assigning tracks or groups as
a new group (Group Setting)
With this function, you can assign
existing tracks or groups to a new group,
and also you can assign a track that
currently belongs to no group to an
existing group.
You can create a maximum of 99 groups
on a disc.
Registration of non-consecutive tracks is
not possible (for example, track 3 and
tracks 7 and 8 cannot be assigned to a new
group).
Track numbers appear according to their
order on the disc, not their order within
the group.
Notes
• It is not possible to make a group setting if the
tracks, groups and disc name on a disc contain
more than the maximum number of characters
that can be stored.
• The tracks or groups must be sequential. If the
desired tracks or groups are not consecutive,
you must move them to make them
consecutive before you can assign them
(“Moving recorded tracks (Move)”, page 46).
1 While the recorder is stopped, press
the jog dial.
2 Turn the dial until “EDIT” appears in
the display, and then press the jog
dial.
3 Turn the jog dial until “ : Set”
appears in the display, and then press
the jog dial.
The track number of the first track
(“STR”) appears in the display.
4 Turn the jog dial until the number of
the desired first track appears in the
display, and then press the jog dial.
This selects the first track of the new
group.
5 Turn the jog dial until the number of
the desired last track appears in the
display, and then press the jog dial to
enter the selection.
This selects the last track of the new
group and the group can be labeled.
1
24567891011123
1
2456 9101112
378
Group 1
Group 2
Group 2
Group 1
Assigning tracks 1 to 3 to a
new group
Assigning group 1 and group 2
to a new group
Track number
Disc
Disc
Jog dial
continued