Filter
Top Products
20
2
Make connections and unlock the
controls.
1 Connect the headphones/earphones
with the remote control to i/LINE OUT.
2 Slide HOLD to the opposite direction of
the arrow (.) on the recorder or the
remote control to unlock the controls.
You can also power the recorder with
the AC power adaptor.
Attach the dry battery case to the recorder and
connect the AC power adaptor to the DC IN 6V
jack on the battery case.
Notes
• Charge the battery at a temperature of 0°C
(+32°F) to +40°C (+104°F). The charging
time may vary, depending on the surrounding
temperature.
• Depending on the battery condition, for
example the built-in battery is drained, it may
take one minute after placing the recorder on
the USB cradle for the recorder starts
charging. If charging does not start after a
minute has passed, remove the recorder from
the USB cradle and place it on again.
Battery life
For details, refer to “Battery life”
(page 76).
When recording
(Unit: Approx. hours)
HOLD
Connect firmly
To i/LINE OUT
Connect firmly
Batteries SP
Stereo
LP2
Stereo
LP4
Stereo
Built-in
rechargeable
battery
8.5 11 14
LR6 (SG)
Sony alkaline
dry battery
7.5 10 11.5
Built-in
rechargeable
battery
+ LR6 (SG)
15 20 26.5