Filter
Top Products
45
7 Repeat step 6, and then enter all
characters of the label name.
8 Press the jog dial for 2 seconds or
more
.
A track or disc is labeled.
Note
When the recording is stopped while labeling a
track or a disc during recording, or when the
recording moves on to the next track while
labeling a track, the input at that point is entered
automatically.
Re-labeling
You can change the label of the disc or a
track by doing the procedure for
“Labeling a track or a disc (Name)”
(page 43).
To re-label a track:
Start playing the track you want to re-
label, and then change the track name
while the recorder is playing, or change
the track name while the recorder is
stopped and the track to be re-labeled is
currently selected.
To re-label a disc:
You can re-label the disc while the
recorder is stopped, recording, or playing.
To cancel labeling
Press x for 2 seconds or more.
To return the preceding
settings
Press x.
Notes
• The recorder is able to display, but cannot
label using Japanese “Katakana” characters.
• The recorder cannot rewrite a disc or track
name of more than 200 letters that was created
by another device.
For the remote control operation, see
page 69.
To move the
cursor from the
letter input area
to the character
palette.
Press the control key
towards VOL –.
To move the
cursor from the
character palette
to the letter input
area.
Press x.
To enter a name. Press the jog dial or
N for 2 seconds or
more.
To insert a blank
space before the
cursor.
Press END
SEARCH and press
the control key
towards VOL + at
the same time.
To delete a letter. Press END
SEARCH and press
the control key
towards VOL – at
the same time.
To display “:”,
“–” or “/” at the
input position in
the letter input
area.
Press X.
To switch capital
and small letters.
Press X.
To cancel
labeling.
Press x in the letter
input area.
1)
Functions of the buttons or the control may
differ depending on when the cursor is in the
letter input area or in the character palette.
Functions
1)
Operations