Filter
Top Products
18
MZ-B100
[Key Check Mode]
This set can check if the set and remote commander function nor-
mally.
• Setting Method of Key Check Mode
1. Setting the test mode. (See page 12)
2. Press the [T MARK] activates the key check mode where all
segments of LCD turn OFF. (At the last two digits of DOT
section, AD value of remote commander key line is displayed
in hexadecimal)
3. When each key is pressed, it is displayed on the LCD, imply-
ing that it was successfully checked as shown below. How-
ever, for the slide switch on the set, it is not checked unless it
is reciprocated.
* The key pressed to enter the key check mode was already
checked at that time.
Set key
Key Indication
N PLAY
> FF
. FR
X PAUSE
EASY SEARCH + EASY +
EASY SEARCH – EASY –
x STOP
REC REC
TRACK MARK T MARK
HOLD (hold) HLDon
HOLD (off) HLDoff
SYNCHRO REC (on) SYCon
SYNCHRO REC (off) SYCoff
PLAY MODE P MODE
DISPLAY DISP
EDIT/ENTER MENU
VOR VOR
ERASE ERASE
REC MODE R-MODE
GROUP GROUP
Remote commander key
Key Indication
N/> rPLAY
. rFR
X rPAUSE
x rSTOP
TRACK MARK rREP
V-UP rSOUND
4. The test mode (display check mode) is automatically activated
when all keys on the set and remote commander were checked
(see above). Also, the test mode (display check mode) gets
back if opening the upper panel during a key check.