Filter
Top Products
15
MZ-B100
[Sound Skip Check Result Display Mode]
This set can display and check the error count occurring during
record and play.
• Setting method of Sound Skip Check Result Display
Mode
1. Setting the test mode. (See page 12)
2. Press the N or [REC] key on the set activates the sound skip
check result display mode where the LCD displays as shown
below.
3. When N key is pressed, the total of error count is displayed
on the LCD, and each time the > key is pressed, the error
count descents one by one as shown below. Also,
when . key is pressed, the error count ascends by one. If
[REC] key on the set is pressed, the error count during record
is displayed.
**
: Sound skip check items counter (hexadecimal)
######
: 6-digit address (hexadecimal) where a sound skipped
last
4. When [REC] key on the set is pressed, the total of error count
is displayed on the LCD, and each time the > key is
pressed, the error count descents one by one as shown below.
Also, when . key is pressed, the error count ascends by
one. If N key is pressed, the error count during play is dis-
played.
**
: Sound skip check items counter (hexadecimal)
######
: 6-digit address (hexadecimal) where a sound skipped
last
Error code
Cause of error Description of error
EIB Sound error correction error
Playback
Stat Decorder status error
Adrs Cannot access the address
BEmp Buffer becomes empty
BOvr Buffer becomes full and sounds are
dumped
Recording BFul Buffer capacity lowers and data are
forcibly written
Rtry Retry count over
5. Quit the sound skip check result display mode, and press
the x key to return to the test mode (display check mode).
Stat**
000
Adrs**
000
BEmp**
000
######
000
P**R**
000
EIB **
000
BFul**
000
Rtry**
000
######
000
P**R**
000
Bovr**
000
LCD dispaly
P**R**
000
Total of play system error count
Total of record system
error count