Sony LBT-ZUX9 Speaker System User Manual


 
57
US
Additional Information
Protected!
The USB device is write-protected.
Push STOP!
You tried to perform an operation that can
be performed only when the playback is
stopped.
REC Error!
Recording did not start, stop halfway or
otherwise could not be performed
(page 52).
Removed
The USB device has been removed.
Step Full!
You tried to program more than 25 tracks
(steps).
Track Full!
You cannot record onto the USB device
because the number of track has reached
its maximum.
Folder Full!
You cannot record onto the USB device
because the number of folder has reached
its maximum.
Device Full!
The memory of the USB device is full.
Precautions
Discs that this system CANNOT play
back
Discs of non-standard shape (for example,
heart, square, star).
Discs that have adhesive tape, paper, or
sticker attached to them.
Rental or used discs with attached seals where
the glue extends beyond the seal.
Discs that have labels printed using ink that
feels tacky when touched.
Notes on discs
Before playing, wipe the disc with a cleaning
cloth from the center out to the edge.
Do not clean discs with solvents, such as
benzine, thinner, or commercially available
cleaners or anti-static spray intended for vinyl
LPs.
Do not expose discs to direct sunlight or heat
sources such as hot air ducts, nor leave it in a
car parked in direct sunlight.
On safety
The system is not disconnected from the AC
power source (mains) as long as it is
connected to the wall socket, even if the
system has been turned off.
Completely disconnect the power cord (mains
lead) from the wall socket (mains) if it is not
going to be used for an extended period of
time. When unplugging the unit, always grip
the plug. Never pull the cord itself.
Should any solid object or liquid get into the
system, unplug the system, and have it
checked by qualified personnel before
operating it again.
For customers in United States
One blade of the plug is wider than other for
the purpose of safety and will fit to the wall
outlet only one way. If you are unable to insert
the plug fully into the outlet, contact your
dealer.
The AC power cord can be changed only by a
qualified service facility.
Continued
l