Filter
Top Products
31
US
Tuner
Listening to the radio
You can listen to a radio station either by
selecting a preset station, or by manually
tuning in the station.
Use buttons on the remote for the
operation.
1 Press TUNER/BAND repeatedly
until “FM” or “AM” lights up in
the display.
2 Press TUNING MODE repeatedly
until “AUTO” lights up in the
display.
3 Press +/–.
You can also use TUNING +/– on the
unit.
The frequency changes as the system
scans for a station.
Scanning stops automatically when a
station is tuned in and “TUNED” lights
up in the display. When a FM stereo
program is tuned in, “STEREO” lights
up in the display.
4 Press TUNER MEMORY.
A preset number flashes in the display.
The stations are stored from preset
number 1.
5 Press +/– repeatedly to select
the preset number you want.
You can also use TUNING +/– on the
unit.
6 Press ENTER.
“Complete!” appears in the display.
The station is stored.
7 Repeat steps 1 to 6 to store other
stations.
You can preset up to 20 FM stations
and 10 AM stations.
The preset stations are retained for half
a day even if you unplug the power
cord or if a power failure occurs.
8 To listen to a preset station,
press TUNING MODE repeatedly
until “PRESET” lights up in the
display. Then, press +/–
repeatedly to select the preset
station you want.
To stop automatic scanning
Press x.
To cancel presetting
Press TUNER MEMORY.
Tuner
Listening to a preset radio
station
Preset number