Filter
Top Products
35
US
Tape
5 For Manual Recording and
Sound Mixing, start playing the
source to be recorded.
Tip
If noise is heard while recording from the
radio, move the respective antenna to reduce
the noise.
6 For Sound Mixing, start singing
along with the music and adjust
the microphone volume by
turning MIC LEVEL.
After you have finished, turn MIC
LEVEL to MIN.
To stop recording
Press x.
Notes
• You cannot eject the disc during CD-TAPE
Synchro Recording.
• If you connect or disconnect a microphone or
headphone during recording, the sound may
cut off for a moment.
• If the effector mode is activated while
recording, the effect will be recorded onto a
tape.
• If the beat pattern is turned on or the drum
sound is activated during recording, the beat
sound would be recorded onto a tape.
Tip
When high level sound signals are input, the
system automatically adjusts the recording level
to prevent distortion of the recorded sound
signals (Auto Level Control Function).