Filter
Top Products
44
GB
Playback does not start.
• Open the disc tray and check whether a
disc is loaded.
• Wipe the disc clean (page 50).
• Reload the disc.
• Load the disc that this system can play
back (page 50).
• Load the disc on the disc tray with the
label side facing up.
• Remove the disc and wipe away the
moisture on the disc, then leave the
system turned on for a few hours until
the moisture evaporates.
•Press NX (or N on the remote) to
start playback.
The sound skips.
• Wipe the disc clean (page 50).
• Reload the disc.
• Move the unit to a place without
vibration (e.g., on top of a stable stand).
• Move the speakers away from the unit,
or place them on separate stands. When
you listen to a track with bass sounds at
high volume, the speaker vibration may
cause the sound to skip.
Playback does not start from the first
track.
• The system is in Program Play or
Shuffle Play mode. Press PLAY MODE
on the remote repeatedly until
“ALL DISCS”, “1 DISC” or “ ”
lights up in the display.
The MP3 file cannot be played back.
• The MP3 file is not recorded in a format
that conforms to ISO9660 Level 1/
Level 2, or Joliet (expansion format).
• The MP3 file does not have the
extension “.mp3”.
• The MP3 file in format other than
MPEG 1 Audio Layer 3 cannot be
played back.
• The system can play back to a depth of
8 folders only.
• The disc contains more than 256 folders.
• The disc contains more than 511 MP3
files.
• MP3 files in MP3 PRO format cannot be
played back.
The MP3 files take a longer time to
play back than others.
• After the system reads all the files on the
disc, playback may take more time than
usual if:
– the number of folders or files on the
disc is very large.
–the folder and file organization
structure is very complex.
The folder name, track name, file
name and ID3 tag characters do not
appear properly.
• Use a disc that conforms to ISO9660
Level 1/Level 2, or Joliet (expansion
format).
• The ID3 tag is not version 1 or version 2.
• The character code that can be displayed
by this system are as follows:
– Upper cases (A to Z)
– Lower cases (a to z)
– Numbers (0 to 9)
– Symbols (< > * +, ? / [ ] \ _)
Other characters may not be displayed
correctly.
USB device
You cannot start transferring to an
USB device.
• The following problems may have
occurred.
– The USB device is full.
–The number of audio file and folder
that system can recognize has reached
the upper limit.
–The USB
device is write-protected.