Filter
Top Products
19
GB
Getting Started
Positioning the Line Array Speaker
System
AFront speaker (left)
BFront speaker (right)
CSurround speaker (left)
DSurround speaker (right)
ESubwoofer A
FSubwoofer B
GUnit
MHC-GTX888 only
MHC-GTX777 only
Notes
• For maximum listening effect, we recommend
you to place the speakers with the horn near to
the unit.
• Place the speakers at least 0.3 meter (1 foot)
away from the unit.
Setting the clock
Use buttons on the remote for the
operation.
1 Press "/1 to turn on the system.
2 Press CLOCK/TIMER SET.
The hour indication flashes in the
display.
If “PLAY SET?” flashes in the
display, press . or > repeatedly
to select “CLOCK SET?”, then press
ENTER.
3 Press . or > repeatedly to
set the hour.
4 Press ENTER.
The minute indication flashes in the
display.
5 Press . or > repeatedly to
set the minute.
6 Press ENTER.
The clock starts functioning.
Note
The clock settings are canceled when you
disconnect the power cord or if a power failure
occurs.
To display the clock when the
system is off
Press DISPLAY on the unit repeatedly
until the clock is displayed. The clock is
displayed for a few seconds.
A
C
F
B
D
E
G
0.3 m
(1 foot)
0.3 m
(1 foot)
G
A
C
B
D
0.3 m
(1 foot)
0.3 m
(1 foot)