Sony LBT-ZTX7 Stereo System User Manual


 
28
GB
* A file is playback repeatedly until you stop
playback.
To change the play mode
Press PLAY MODE on the remote
repeatedly when playback is stopped. You
can select the following play mode.
* Each time you perform Shuffle Play, the
playing order may differs.
Notes on USB device
The following situations can increase the time
it takes to start playback:
– the folder structure is complex.
– the memory capacity is excessive.
When the USB device is connected, the
system reads all the files on the USB device.
If there are many folders or files on the USB
device, it may take a long time to finish
reading the USB device.
Do not connect the system and the USB
device through an USB hub.
Depending on the previous operation you
have performed with the USB device, the
operation time for the USB device may vary.
If the system is turned off during Resume Play
mode, when the system is turned on again
playback starts from the beginning of the
audio file.
This system does not necessarily support all
the functions provided in a connected USB
device.
The playback order for the system may differ
from the playback order of the connected
digital music player.
Be sure to turn off the system before removing
the USB device. Removing the USB device
while the system is turned on may corrupt the
data on the USB device.
You are recommended not to save other types
of files or unnecessary folders on an USB
device that has audio files.
A folder that does not include an audio file is
skipped.
Files and folders are played back in
alphabetical order in this system.
The system can only play back
– MP3 files with the extension “.mp3”.
– WMA files with the extension “.wma”.
– AAC files with the extension “.m4a”.
Note that even when file names have the
above file extensions, if the actual file differs,
the system may produce noise or may
malfunction.
The system can recognize the maximum of
– 999 folders.
– 999 audio files.
The maximum number of audio files and
folders may vary depending on the audio file
and folder structure.
Compatibility with all encoding/writing
softwares, recording devices, and recording
media cannot be guaranteed. Incompatible
USB device may produce noise or interrupted
audio or may not play back at all.
To Do this
Find a point in a
file
Hold down m or M
on the remote during
playback, then release it
at the point you want.
Playback all the
files in the USB
device or the
folder repeatedly
(Repeat Play)
Press REPEAT on the
remote repeatedly
during playback until
“REP” lights up in the
display.
Playback a file
repeatedly*
(Repeat Play)
Press REPEAT on the
remote repeatedly
during playback until
“REP 1” lights up in the
display.
Select To play back
When “ ”,
“SHUF”,
SHUF” and
“PGM” do not light
up in display
(Normal Play)
All the files in original
order.
(Normal Play)
All the files in the
selected folder in
original order.
SHUF*
(Shuffle Play)
All the files in random
order.
SHUF*
(Shuffle Play)
All the files in the
selected folder in
random order.