Filter
Top Products
34
GB
4 Select a track or file to program.
To program a track:
Press . or > repeatedly until the
track number you want appears in the
display.
To program an audio file:
Press +/– repeatedly until the
folder you want appears in the display,
then press . or > repeatedly
until the file number you want appears
in the display.
“
– –.– –” flashes in the display.
1)
When program an audio file, “– –.– –”
appears.
2)
Appears for USB function only.
5 Press ENTER.
The track(s) or file(s) is(are)
programmed.
The programmed step number appears
in the display.
6 To program additional discs,
tracks or files.
7 Press NX (or N on the
remote).
Program Play starts.
Other operations
Note
(For USB function only)
The program list is cleared when you perform
the erase operation.
Tips
• The program you made remains in the
system’s memory even after it has been
played back. Press NX
(or N on the
remote) to play back the same program again.
• If “--.--” appears instead of the total playing
time during programming, this means:
– you have programmed a track in an AUDIO
CD with track number exceeds 20.
– the total playing time has exceeded 100
minutes.
– you have programmed an audio file.
To program Repeat steps
Other discs 3 and 5
Other tracks or files
on the same disc
4 and 5
Other tracks or
files on other discs
3 to 5
Other files on
same folder
4 and 5
(without pressing
+/–)
Other files on
other folder
4 and 5
Track or file
number
Total playing
time (including
selected track)
1)
File name
2)
2)
2)
To Do this
Cancel Program
Play
When playback is
stopped, press PLAY
MODE on the remote
repeatedly until “PGM”
disappear from the
display.
Delete the last step
from the program
list
Press CLEAR on the
remote when playback is
stopped.