Filter
Top Products
14
GB
D D-LIGHT SYNC OUT jack
Connect the D-LIGHT SYNC controller.
You need to connect the
D-LIGHT SYNC controller to a lighting
device* (not supplied). The lighting
device will react according to the control
signals transmitted by the D-LIGHT
SYNC controller upon receiving music
source from the system. For details on the
use of the D-LIGHT SYNC controller and
lighting device, refer to the operating
instructions supplied with the respective
device.
* Refer to the operating instructions supplied
with the D-LIGHT SYNC controller for the
recommended lighting device.
Note
The lighting effect may be different depending
on the connected lighting device or the type of
music being played back.
E VOLTAGE SELECTOR
For models equipped with a voltage
selector, set VOLTAGE SELECTOR to
the position of your local power line
voltage.
Depending on the model, the VOLTAGE
SELECTOR may differ.
F Power
Connect the power cord to a wall outlet.
The demonstration appears in the display.
When you press "/1, the system turns on
and the demonstration automatically
ends.
If the supplied adaptor on the plug does
not fit your wall outlet, detach it from the
plug (only for models equipped with an
adaptor).
Using the subwoofers
(MHC-GTX888 only)
You can use the subwoofers to enhance
the bass.
Subwoofer A (SS-WG888A)
1 Press SUBWOOFER ON/OFF on
the subwoofer A to light up the
indicator.
The subwoofers are turned on.
2 Turn SUBWOOFER LEVEL on the
subwoofer A to adjust the level.
D-LIGHT SYNC
controller cord
VOLTAGE SELECTOR
220V
127V
220V
VOLTAGE SELECTOR
230-240V
120V
220V
Brazil model only Other models