Filter
Top Products
23
GB
Basic Operations
To change the AM tuning interval
(Except for European model)
The factory setting for AM tuning interval
is 9 kHz (or 10 kHz for some areas).
Use the buttons on the unit for the
operation.
1 Press TUNER/BAND repeatedly to
select AM band.
2 Press "/1 to turn off the system.
3 When demonstration appears, hold
down ENTER and then press "/1.
The system turn on automatically.
“AM 9K STEP” or “AM 10K STEP”
appears in the display.
When you change the interval, all the AM
preset stations are erased.
Tip
To improve broadcast reception, adjust the
supplied antennas, or connect an external
antenna.
To reduce static noise on a weak FM
stereo station
Press FM MODE on the remote
repeatedly until “MONO” lights up in the
display.
There will be no stereo effect, but the
reception will improve.
Transferring onto an
USB device
You can transfer music from a sound
source to an optional USB device by
connecting it to the (USB) port on
the unit.
The audio format transferred by this
system is MP3. The approximate size of
the transferring is about 1 MB per minute
of transferring time (except MP3 disc).
The files those are transferred onto the
USB device is for personal use only.
See “Compatible USB devices with this
system” (page 56) for a list of USB
devices that
can be connected to this system.
There are three ways to transfer onto an
USB device.
CD-USB Synchronized Transfer:
You can easily transfer an entire disc onto
an USB device.
REC1 Transferring:
You can easily transfer a single track or
file that is currently being played back
onto an USB device.
Manual Transferring:
You can transfer just the portion you want
from a sound source, including connected
audio components.
1 Connect a transferable USB
device to the (USB) port on
the unit.
USB device
Continued
l