Sony headphone Headphones User Manual


 
7
USING WITH SONY ERICSSON T39m
a. ACTIVATING THE BLUETOOTH
You must activate your Bluetooth to establish a Bluetooth connection between
your mobile phone and other Bluetooth devices.
1. Press Menu Key. Scroll to Extras and press YES. Select Operation mode, YES. On,
YES.
2. Continue pressing NO to exit.
QUICK ACCESS:
Press Menu followed by the sequence of numbers below.
Extras Blue tooth Operation mode
T39m 5 6 4
b. PAIRING TO THE CELLULAR PHONE
1. Bring the cellular phone at about 20 cm from the Car Kit.
2. From the ON state, press the multi-function button for 10 seconds or until a distinctive
three-tone sound will be heard and at the same time, the Bluetooth indicator LED
changes from blinking blue to alternate blinking of red and blue. This indicates that the
unit is now ready for pairing.
3. Press the multi-function button once again for a short time, to access headset
pairing mode.
4. Press Menu Key. Scroll to Extras, YES. Select Bluetooth, YES. Select Paired devices,
YES. Add device, YES. Choose Phone initiates, YES. Choose Headset, YES. The
phone will then search the device to be added. After the device is found, press YES.
QUICK ACCESS (for step 4):
Press Menu then follow the sequence of numbers below:
Extras Blue tooth
Paired
devices
Add
device
Phone
initiates
Headset
T39m 5 6 2 Yes 1 2
5. Enter 0000 as the passkey. If the pairing is successful, the alternating red/blue lights
will stop. Press YES to confirm the name of the device. If pairing is unsuccessful, the
steps above may be repeated.
6. Continue pressing NO to exit from Menu.
The unit is now ready to link calls from the phone directly to the Car Kit.
c. ANSWERING/RECEIVING A CALL
When the phone is receiving a call, a ring tone will be heard on the Car Kit.
1. Press the multi-function button once to answer the call. Note: Pressing the button again
will hang-up and terminate the call.
2. If you wish to answer the call on the cellular phone, just press YES and audio will be
heard on the phone. If you press once on the multi-function button, audio will be
transferred to the Car Kit.
3. Pressing the multi-function button once again will terminate the call.
d. MAKING A CALL with the Car Kit on
Normal dialing
1. Enter the contact number and press YES. Audio can be heard on the Car Kit.
Simultaneously, a questionRetrieve call in phone? will be displayed. Ignoring
or pressing No, will retain the call to the Car Kit. Pressing Yes will transfer the
audio to the cell phone.
2. Press the multi-function button to hang-up and terminate the call.