Filter
Top Products
24
3. On the Entry Details, choose “…MORE…” and press SELECT.
4. On the Add New, choose Phone Number, SELECT. “No.:_______” is highlighted,
Press CHANGE. Enter the corresponding contact number and then press Ok. (Do not
press DONE yet).
5. Using the 5-way Navigation key scroll down to “Voice Name” then press RECORD.
Follow instructions on the screen.
Note: If recording is successful, an icon will appear next to Voice Name.
6. Press DONE.
Notes: 1. The recorded voice will be played back to you.
2. On the listed names in your Phonebook, an icon appears next to a name
which has a “Voice Name”. This indicates that you can contact this person via
voice dial.
3. Noisy environment may affect voice recognition. Record your voice in a quiet
environment.
USING WITH NOKIA 6310/6310i
a. ACTIVATING THE BLUETOOTH
You must activate your Bluetooth to establish a Bluetooth connection between your mobile
phone and other Bluetooth devices.
1. Press the Menu button. Scroll to Bluetooth, SELECT. Press SELECT again.
2. Choose On, SELECT. An icon will appear on the upper left corner.
3. Press Back then Exit to get out of Menu.
QUICK ACCESS:
Press Menu followed by the sequence of numbers below.
Blue tooth Select On Select
6310 10 1 1 1
6310i 11 1 1 1
b. PAIRING TO THE CELLULAR PHONE
1. Bring the cellular phone at about 20 cm from the Car Kit.
2. From the ON state, press the multi-function button for 10 seconds or until a distinctive
three-tone sound will be heard and at the same time, the Bluetooth indicator LED
changes from blinking blue to alternate blinking of red and blue. This indicates that the
unit is now ready for pairing.
3. Press Menu button. Scroll to Bluetooth, SELECT. Scroll to Search for audio
accessories, SELECT. The phone is now scanning for Bluetooth devices. SELECT the
Car Kit. The phone will initiate connection with the Car Kit.
QUICK ACCESS (for step 3):
Press Menu followed by the sequence of numbers below.
Bluetooth Search for audio accessories
6310 10 2
6310i 11 2
4. Enter “0000” as the passcode then press OK. The phone is now connected with the Car
Kit.
5. Continue pressing Back then finally Exit.
The Car Kit is paired and ready to use. An icon will be displayed during the standby mode
indicating that the Car Kit is linked with the phone.