Filter
Top Products
33
2. Pressing once again on the multi-function button will terminate the call.
Note: Cell phone buttons can also be used to answer a call but audio will still be heard on the
Car Kit.
e. MAKING A CALL with the Car Kit on
Normal dialing
1. Enter the contact number and press CALL key. As you dial, audio and the keypad
tones can be heard on the Car Kit, not on the phone.
2. Press the multi-function button to terminate the call.
Voice dialing
Refer to step h for the procedure when recording for voice dialing.
1. Press once on the multi-function button to activate the voice dialing.
2. A beep will then be heard on the Car Kit prompting the user to say the name of the
person to call.
3. Say the name. The name will be played back to you. The phone will then place the
call automatically. In case the cellular phone does not recognize the name
spoken, the steps above may be repeated.
4. Press the multi-function button again to terminate the call.
Redialing
Press twice quickly the multi-function button to redial the last number.
f. AUDIO TRANSFER
Audio Transfer can be done by pressing the multi-function button or accessing the cell
phone’s menu during ongoing calls.
g. REJECTING A CALL
Press the multi-function button twice quickly to reject the incoming call.
h. RECORDING FOR VOICE DIALING
Use your phone when recording voice dialing.
1. Press Menu and select Contacts and Search.
2. Choose the name which you want to make a voice dial then press Details.
3. Press Options and select Add voice tag. Follow the instructions that are displayed.
Your voice will then be saved on the phone after it is played back to you.
4. Continue pressing Back then finally Exit.
Note: Record your voice command in a quiet place so that only your voice will be recorded on
the phone.
USING WITH NOKIA 6650
a. ACTIVATING THE BLUETOOTH
You must activate your Bluetooth to establish a Bluetooth connection between your mobile
phone and other Bluetooth devices.
1. Press Menu. Scroll to Connectivity, SELECT. Bluetooth, SELECT.
2. Bluetooth
Off
, SELECT. Choose On, SELECT. An icon will appear on the display on the
standby mode.
3. Continue pressing Back to exit from Menu.