Filter
Top Products
36
4. Enter “0000” as the passcode then press OK. “Waiting for…” and “Pairing
with…complete” will be displayed simultaneously.
5. Continue pressing Exit key to exit the Menu.
The Car Kit is paired and ready to use. An icon will be displayed during the standby mode
indicating that the Car Kit is linked with the phone.
Note: Once paired, press the multi-function button once to establish simultaneous connection
between the Car Kit and the phone (keypad tones can be heard on the Car Kit every time the
keypad is pressed). If ever the paired device was deleted and turned off, once it is turned on,
there is no need to undergo the same pairing procedure. Press the multi-function button once.
“Passcode for…” will be displayed. Enter the passcode then press OK. “Accept connection
request from…” press YES to reconnect.
c. AUTO ACCEPT MODE
The auto accept mode allows the Bluetooth function to be turned on automatically whenever
the user starts sending information such as answering or making a call via the Bluetooth Car
Kit.
1. Press the Menu button. Scroll to Connect., press . Bluetooth, press . Press
button. “Paired devices” will be displayed as title.
2. Select the Car Kit and press . Scroll to Set as authorised, and press to
SELECT. “Connections will take place without confirmation. Continue?” press YES.
3. Continue pressing Exit key to exit the Menu. An icon will then appear on the upper right
corner.
d. ANSWERING/RECEIVING A CALL
When the phone is receiving a call, a ring tone will be heard on the Car Kit as well as on the
phone.
1. Press the multi-function button down once to answer the call.
2. End the call by pressing the button again.
Note: Cell phone buttons can also be used to answer a call but audio will still be heard on the
Car Kit.
e. MAKING A CALL with the Car Kit on
Normal dialing
1. Enter the contact number and send. As you dial, audio and the keypad tones can
be heard on the Car Kit simultaneously but not on the phone.
2. Press the multi-function button to hang-up and terminate the call.
Note: If the call is terminated using the cellular phone, a tone will be heard on the
Car Kit indicating that the call has been terminated.
Voice dialing
Refer to step h for the procedure when recording for voice dialing.
1. Press the multi-function button once to activate the voice dialing.
2. A beep will then be heard on the Car Kit prompting the user to say the name of
the person to call.
3. Say the name. The name will be played back to you. The phone will then place
the call automatically. In case the cellular phone does not recognize the name
spoken, the steps above may be repeated.
4. Press the button again to terminate the call.
Redialing
Press quickly the multi-function button twice to redial the last number.