Filter
Top Products
21
USING WITH MOTOROLA V80
a. ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your phone to establish a Bluetooth connection
between your mobile phone and other Bluetooth devices.
1. Press the joystick to access Menu. Scroll to Settings, SELECT. Choose
Connection, SELECT. Bluetooth Link, SELECT.
2. Scroll to Setup, SELECT. Scroll to Power, CHANGE. Choose ON, SELECT.
3. Continue pressing Back to exit.
b. PAIRING TO THE CELLULAR PHONE
1. Bring the cellular phone at about 20 cm from the Car Kit.
2. From the ON state, press the multi-function button for 10 seconds or until a distinctive
three-tone sound will be heard and at the same time, the Bluetooth indicator LED
changes from blinking blue to alternate blinking of red and blue. This indicates that the
unit is now ready for pairing.
3. Press the joystick to access Menu. Scroll to Settings, SELECT. Choose
Connection, SELECT. Bluetooth Link, SELECT.
4. Choose Hands-free, SELECT. [Look for devices], SELECT. The phone will then scan
the device to be added.
5. On the Scan results, choose the name of this car kit, SELECT. A question “Bond with
… (device name)?” appears. Press YES.
6. Enter Bluetooth passkey “0000” then press ok. If pairing is successful, a remark
“Connected: (device name)” appears. The phone exits automatically.
The Car kit is now linked or paired with the phone. If pairing is unsuccessful, the steps
above may be repeated.
c. ANSWERING/RECEIVING A CALL
When the phone is receiving a call, ring tone will be heard on the phone and on the Car Kit.
1. Shortly press the multi-function button once to answer the call.
2. Shortly press the multi-function button once to terminate the call.
f. MAKING A CALL with the Car Kit on
Normal dialing
1. Enter the contact number and press Call key/Touch Sending key. Audio will be
heard on the Car Kit.
2. To terminate or hang-up the call, shortly press the multi-function button.
Voice dialing
Refer to step h and i for the procedure when activating and recording for voice dialing.
1. Shortly press the multi-function button once to activate voice dialing.
2. A beep will then be heard on the Car Kit prompting the user to say the voice name
of the person to call.
3. Say the name. The voice name will be played back to you. The phone will then
place the call automatically. In case the cell phone does not recognize the name
spoken, the steps above may be repeated.
4. Shortly press the hang-up button to terminate the call.
Redialing
Press the multi-function button twice quickly to redial the last number.