Filter
Top Products
11
3. Follow the instructions in the display. An icon will appear next to a contact name
which has a voice command.
4. Continue pressing NO to exit.
QUICK ACCESS:
Press Menu followed by the sequence of numbers below.
Settings Voice control Voice commands Contacts
T68 5 8 2 4
Settings Voice control Voice dialing Edit names
T68i 5 6 1 2
Note: Record your voice command in a quiet place so that only your voice will be
recorded on the phone.
USING WITH SONY ERICSSON P800 / P900
a. ACTIVATING THE BLUETOOTH
You must activate your Bluetooth to establish a Bluetooth connection between your mobile
phone and other Bluetooth devices.
1. Flip to open mode. On the phone’s Applications window, scroll to Control Panel and
tap it using the “stylus”. On the lower portion, tap Connections index. Tap
Bluetooth.Tap Settings index. On the Operation mode, tap On.
2. Tap to exit and return to the Applications window.
b. PAIRING TO THE CELLULAR PHONE
1. Bring the cellular phone at about 20 cm from the Car Kit.
2. From the ON state, press the multi-function button for 10 seconds or until a distinctive
three-tone sound will be heard and at the same time, the Bluetooth indicator LED
changes from blinking blue to alternate blinking of red and blue. This indicates that the
unit is now ready for pairing.
3. Press the multi-function button once again for a short time, to access headset
pairing mode.
4. Flip to open mode. On the phone’s Applications window, scroll to Control Panel and tap
it. On the lower portion, tap Connections index. Tap Bluetooth. Tap Devices index.
Bluetooth devices is displayed as sub-title. Tap Add. The phone is now searching for
pairable devices.
5. Devices found are then displayed. Tap the device you want to pair with your phone.
Bonding in progress will be displayed on screen and simultaneously, the phone will
ask for the pass key.
6. On the lower left corner of the screen, tap . Enter “0000” as the passkey then tap
Done. Also tap Done under the sub-title, “Secure Connection.” If pairing is successful,
the alternating red/blue lights will stop.
7. Tap to exit and return to the Applications window. If the pairing is unsuccessful, the
steps above may be repeated.
The unit is now ready to link calls from the phone directly to the Car Kit. An icon will
appear during the standby mode indicating that the Car Kit is linked with the phone.
c. ANSWERING/RECEIVING A CALL
When the phone is receiving a call, a ring tone will be heard on the Car Kit.
1. Press the multi-function button once to answer the call. Pressing the button again will
hang-up and terminate the call.